Wallmount Bottle Opener for under $20

Hey All, With Father’s Day this past weekend, it was a pretty last minute gift idea that we decided on. We only had a week to have it completed (which we successfully did, longest was waiting for delivery of the bottle opener), we made two things. The first being in this post, the other, a custom end table/magazine rack will be posted later. This project a Wallmount Bottle Opener, is super quick and easy to build and can be done with scrap that you have lying around. If you do not have any scrap, with buying the bottle openers, materials are under $15. I haven’t done any sayings on it yet, as I’m letting my husband choose which one he wants. When that gets completed, I will put an updated photo up of it.

Make sure you read through the instructions and look over the plans fully before you start your project. Check out the “Before You Start” page for more on tool information, tips & tricks. Always stay safe and wear all safety protection. It is always best to make your cuts as you go and as they say, measure twice and cut once.
If you have any questions just ask away!

Shopping List

1 - 1” x 8” x 4’

1 - 1” x 4” x 4’

Metal Wall Mount Bottle Opener - Amazon

1 ¼” wood Screws


Wood Glue

Stainable Wood Filler

Cut List

1 - 1” x 8” @ 17” - Back

1 - 1” x 8” @ 4 ¼” - Bottom

2 - 1” x 4” @ 4 ¼” - Sides

1 - 1” x 4” @ 8 ½” - Front

Tools Needed


Circular Saw






Measuring Tape







Shop Towels


Ear Protection


Safety Glasses

The Step-by-Step

Use 1 ¼” Wood Screws & Glue to attach the bottom to the back piece. (recess the screws slightly to allow space for wood filler)

Using the 1 ¼” Wood Screws & Glue to Attach the sides to the Back/Bottom

Again, use the 1 ¼” Wood Screws and Glue to attach the front piece.

Wood fill and allow it to dry before giving a good sand. Then apply your stain.

Once the stain has dried, attach the Bottle Opener!



Now subscribe below to get instant emails to new posts & projects.


Check me out on Facebook & Pinterest too!